济南富强门业有限公司网站 在线留言 联系我们

服务咨询热线

151 6888 2846

热门关键词: 水晶折叠门 水晶卷帘门 抗风卷帘门

公司新闻

首页>>新闻资讯>>公司新闻快速卷帘门发生失控的原因有哪些?
联系我们
济南富强门业有限公司

联系人:林经理

电话:151 6888 2846

邮箱:527800164@qq.com

地址:济南市历下区化纤厂路8号3号楼101号

快速卷帘门发生失控的原因有哪些?

来源:http://www.jnzxmy.com 日期:2020-08-24 发布人:
很多的工厂里面都会使用快速卷帘门,是因为这种工业门具备防盗的功能。但是这种快速门的开启关闭非常的频繁。以致于长时间的使用会出现一些问题,例如快速卷帘门的控制系统失效。
  Many factories will use fast shutter doors, because this kind of industrial door has the function of anti-theft. But this kind of fast door opens and closes very frequently. As a result, there will be some problems in the long-term use, such as the failure of the control system of the fast rolling shutter door.
  一般来说,长期使用快速卷帘门,发生控制失效的原因主要可能是下面的几个:
  Generally speaking, the main causes of control failure in the long-term use of fast shutter doors are as follows:
  1、工业快速卷帘门的继电器的接触点出现粘死的情况,这时候我们需要更换继电器。
  1. The contact point of the relay of the industrial fast rolling shutter door is stuck. At this time, we need to replace the relay.
  2、快速门的行程微动,开关失效或者是出片变形。如果是这样的话,那就需要更换微动开关或触片。
 
  2. The travel of the fast door is inching, the switch fails or the plate is deformed. If so, it is necessary to replace the microswitch or contact pad.
  3、快速卷帘门的靠板螺丝发生松动的情况,易导致靠板的移位。这种情况只是需要紧定滑块螺钉并使靠板复位。
  3. The screws of the back plate of the fast rolling shutter door are loose, which is easy to cause the displacement of the back plate. In this case, it is only necessary to tighten the slider screw and reset the backup plate.
  4、工业快速卷帘门的滑块或螺母不能随丝杆转动而移动。这个可能就是需要润滑或者其他的解决方法了。
  4. The slider or nut of the industrial fast shutter door cannot move with the rotation of the screw rod. This may be the need for lubrication or other solutions.
  5、快速卷帘门的限位器传动齿轮发生破损。发生这种情况的话,那么就需要进行更换限位器传动齿轮。
  5. The transmission gear of the limiter of the fast rolling shutter door is damaged. If this happens, then it is necessary to replace the drive gear of the limiter.
  6、快速卷帘门的开启关闭的上下键被卡死。这个简单,按钮坏了就更换按钮就行了。
  6. The up and down keys for opening and closing the quick shutter door are stuck. This is simple. If the button is broken, replace it.

阅读/ Recommended reading

卷帘门遥控器的配对方法因类型不同而有所差异,以下是常见的几种配对方式:The pairing methods for remote control of rolling shutt...

车库卷帘门弹簧问题的维修指南 2025-02-22
翻板车库门和卷帘车库门有什么不同 2025-02-11
剖析翻板车库门和卷帘车库门有什么不同点 2025-02-01
防火卷帘门的面积核算方式及装置要求 2025-02-14
济南卷帘门限位器坏了还能修理吗? 2025-02-03
每一扇卷帘门,都是品质与工艺的结晶 2025-01-27
电动卷帘门限位调整需要注意什么 2025-01-07
济南卷帘门的工作原理及安装维修 2024-12-18