Remote control rolling shutter door is suitable for commercial street shops, villa garages, shopping malls, institutions, colleges, factories and enterprises and other public places or residential buildings. Especially the door opening is large, which is inconvenient to install the ground door body, which plays a role of convenient and quick opening. Such as garage door, shopping mall fire shutter, aircraft hangar door. How should we maintain the roll gate when using and installing it?

1、遥控卷帘门底梁座上限位置必须与轴承架下端保持大于150mm的距离，以确保制动停止时不发生冲顶现象。

1. The upper limit of the bottom beam seat of the remote control rolling shutter door must be kept more than 150 mm away from the lower end of the bearing frame to ensure that there is no topping phenomenon when the brake stops.

2、遥控卷帘门体和易锈部位，应进行定期防腐、油漆及保养处理，禁止用重物、硬物冲击门面。

2. The remote control rolling shutter door body and easily rusty parts shall be subject to regular anti-corrosion, painting and maintenance treatment. It is forbidden to impact the door surface with heavy objects and hard objects.

3、遥控卷帘门运行时如有发生较大抖动或异常声音时应停机检查，排除有碍门体正常启闭的杂物。

3. When the remote control rolling shutter door is running, if there is a big shaking or abnormal sound, stop the machine for inspection, and eliminate the impurities that hinder the normal opening and closing of the door body.

4、遥控卷帘门门体和卷闸门电机禁止与酸、碱性物溶液接触，以防腐蚀门体表面。所以对于卷闸门我门要小心呵护，这样才能够提高卷闸门的可用性，才能够延长卷闸门的寿命。

4. Remote control rolling shutter door body and rolling gate motor are forbidden to contact with acid and alkaline solution to prevent corrosion of door surface. Therefore, we should take care of the rolling gate carefully, so as to improve the usability of the rolling gate and extend the service life of the rolling gate.

遥控卷帘门储电型电机四大好处：

Four advantages of remote control rolling shutter door electric storage motor:

1.：操作方便，配交直流卷门机控制箱同时可配接遥控器，遥控距离远，操作方便。

1. Easy to operate, equipped with AC / DC door rolling machine control box, can be equipped with remote control, remote control distance is far, easy to operate.

2.定位精确，卷闸门上、下行程由限位开关自动控制，定位精确可靠，开闭。

2. Accurate positioning. The up and down travel of the rolling gate is automatically controlled by the limit switch, which ensures accurate and reliable positioning and safe opening and closing.

3.精工设计，噪音小，提升力大，采用马达制造，加厚的减速箱齿轮，耐磨静音，彻底排除电机扫齿的可能。

3. Precision design, low noise and large lifting force. It is made of high-quality motor. The thickened reducer gear is wear-resistant and silent, which completely eliminates the possibility of motor tooth sweeping.

4.防雷设计，采用大电流多线路的继电器，能有效防止雷击，经久耐用。

4. Lightning protection design, the use of large current multi line relay, can effectively prevent lightning, durable.