电动卷帘门需要方便人们或者车辆进进出出的，所以非常需要确保电动卷帘门的性能，电动卷帘门的底边柔软，当电动卷帘门的底边安装完需要对其功能进行测试验收，济南卷帘门厂家建议大家需要注意这些步骤：

The electric roller shutter door needs to be convenient for people or vehicles to enter and exit, so it is very necessary to ensure the safety performance of the electric roller shutter door. The bottom edge of the electric roller shutter door is safe and soft. When the safety bottom edge of the electric roller shutter door is installed, its function needs to be tested and accepted. The Jinan roller shutter door manufacturer recommends that you pay attention to these steps:

一、先将电动卷帘门的急停键关闭，开启电动卷帘门电控箱电源，按压一次底边接收器面板学习键，检查信号接收器灯亮。

1、 First close the emergency stop button of the electric roller shutter door, turn on the power supply of the electric roller shutter door electric cabinet, press the bottom receiver panel learning button once, and check that the signal receiver light is on.

二、按压几次电动卷帘门的底边布兜内压力胶管，信号接收器指示灯出现闪烁表示接收记忆成功，重复按压底边压力胶管，每压一次接收器就会灯亮一次，测试信号连接完成。

2、 Press the pressure hose in the safety bottom cloth pocket of the electric roller shutter door several times, and the indicator of the signal receiver flashes, indicating that the receiving memory is successful. Press the bottom pressure hose repeatedly, and the receiver will light up once for each press, and the test signal connection is completed.

三、打开电动卷帘门的电控箱急停键，按压底边布兜内的压力胶管，那么电动卷帘门的门体接到信号会自动上升，正常运转门体。

3、 Open the electric control cabinet emergency stop button of the electric roller shutter door and press the pressure hose in the bottom cloth bag, then the door body of the electric roller shutter door will automatically rise after receiving the signal, and the door body will operate normally.

四、那么在测试电动卷帘门底边和使用电动卷帘门过程中，如果发现电控箱无法接收到底边信号时，需要注意检查底边发射器内电池和底边压力胶管，如果发现电池耗尽就要更换新电池。如果底边压力胶管破损、漏气，破损漏气的要进行密封处理，必要时要更换新的底边压力胶管。

4、 In the process of testing the safety bottom of the electric roller shutter door and using the electric roller shutter door, if it is found that the electric cabinet cannot receive the safety bottom signal, it is necessary to pay attention to checking the battery in the safety bottom transmitter and the bottom pressure hose. If it is found that the battery is exhausted, replace it with a new battery. If the bottom pressure rubber hose is damaged or leaking, the damaged and leaking rubber hose shall be sealed, and a new safety bottom pressure rubber hose shall be replaced if necessary.

电动卷帘门的底边验收和测试就简单介绍到这里，建议大家选择的电动卷帘门厂家使用安装更放心，安装技术人员更放心有保障。如果还想了解更多电动卷帘门资讯，欢迎大家关注我们http://www.jnzxmy.com更多信息！

So far is the acceptance and testing of the safety bottom of the electric roller shutter door. It is recommended that the manufacturer of the electric roller shutter door selected be more confident in its use and installation, and that the installation technicians be more confident and secure. If you want to know more about the electric rolling shutter door, please pay attention to us http://www.jnzxmy.com More information!