车库门在我们的日常生活中，车库门的遥控器很少坏，有些只是丢失了密码，有些只是没电了。如果遥控器丢了，那就没办法了，所以，我们只能更换它。如果是丢失了密码，我们需要知道如何编码车库遥控器。下面济南卷帘门厂家为您讲讲。

Garage door in our daily life, the remote control of garage door rarely breaks, some just lose their passwords, and some just run out of power. If the remote control is lost, there is no way, so we can only replace it. If we lose our password, we need to know how to code the garage remote control. Now let's talk about Jinan roller shutter factory.

1.目前车库门遥控器主要与车库门无线连接，一般采用固定编码或滚动编码。由于每个的车库门遥控器的编码不同，获得它的比较简单方法是咨询制造商。但一般市场上车库门遥控器的频率为433.92mhz或315MHz。遥控器一般有三个键，但也有两个键;

1. At present, the garage door remote controller is mainly wirelessly connected with the garage door, and generally adopts fixed coding or rolling coding. Since the codes of garage door remote controllers of each brand are different, the relatively simple way to obtain them is to consult the manufacturer. However, the frequency of garage door remote control in the general market is 433.92mhz or 315MHz. The remote controller usually has three keys, but there are also two keys;

2.准备遥控器进行代码匹配，按下开门器的代码匹配键，该键通常在电机后面，按住1-2秒，指示灯变为常亮。按遥控器按键，遥控器上的红灯和开门器上的红灯同时亮，按2-4次(开门器的不同次数)，两个红灯同时亮2-4次，即码匹配成功;

2. First, prepare the remote control for code matching, press the code matching key of the door opener, which is usually behind the motor, press and hold for 1-2 seconds, and the indicator light will turn on. Press the button on the remote control, and the red light on the remote control and the red light on the door opener will be on at the same time. Press 2-4 times (different times of the door opener), and the two red lights will be on at the same time for 2-4 times, that is, the code matching is successful;

3.代码匹配过程完成后，指示灯应熄灭。如果此时码匹配指示灯一直亮着，则表示仍处于码匹配状态，很可能配备了其他遥控器，导致将来自动开门关门造成不必要的损失。因此，代码匹配完成后，一定要按代码匹配键退出;

3. After the code matching process is completed, the indicator light should be off. If the code matching indicator is always on at this time, it means that it is still in the code matching state, and it is likely to be equipped with other remote controls, resulting in unnecessary losses caused by automatic door opening and closing in the future. Therefore, after the code matching is completed, be sure to press the code matching key to exit;

以上是车库门遥控器编码的具体操作步骤，希望它能帮助您。当然在平常生活中还是要对车库门多加维护和保养，这样才能让其使用的更好更长久，更多咨询了解就来我们网站http://www.jnzxmy.com关注吧。

The above is the specific operation steps of garage door remote control coding. I hope it can help you. Of course, in daily life, we still need to maintain the garage door more, so that it can be used better and longer. For more information, please come to our website http://www.jnzxmy.com Pay attention.