电动卷帘门的布线是可以自己动手完成的，在这里，济南富强门业给大家介绍一下，关于电动卷帘门布线的问题。

The wiring of electric rolling shutter door can be completed by oneself. Here, Jinan Fuqiang door industry will introduce the wiring of electric rolling shutter door.

1、如果是选择只用遥控控制(就像空调、电视等的遥控一样)如果只需要遥控控制，那么你就只需要让电工在你的窗帘盒里或者就在你的窗帘安装面附近留一个电位并装上插座(就象预留空调插座一样)——不过要注意的是这个电位要求底盒是用“86型号”的(非国标的那种外置塑料底盒，相对比普通家用的铁底盒大一点点的)。

1. If you choose to use remote control only (just like the remote control of air conditioner, TV, etc.), if you only need remote control, then you just need to ask the electrician to leave a potential in your curtain box or near the installation surface of your curtain and install the socket (just like reserving the air conditioner socket) - but it should be noted that this potential requires the bottom box to use "86 model" (non national standard) That kind of external plastic bottom box is a little bigger than the ordinary household iron bottom box).

2、如果是选择既有遥控又有手控面板控制(就像电灯开关面板一样)既有遥控又要手控面板，那么就让电工给你在墙上你觉得合适美观的地方开出一个电位——注意使用的底盒要求如上。另外从你装底盒的位置再引一条三芯线(单轨道一根，双轨道要求两根。)注意：每条电动卷帘门轨道电机必须是接一条三芯线，两条轨道的电机零线不可以共用!

2. If you choose to have both remote control and manual control panel (just like the light switch panel) and both remote control and manual control panel, then let the electrician give you a potential on the wall where you think it is suitable and beautiful - pay attention to the bottom box requirements as above. In addition, lead a three core wire from the position where you install the bottom box (one for single track, two for double track). ）Note: each electric roller shutter track motor must be connected with a three core wire, and the motor zero line of the two tracks cannot be shared!

注意：以上的方法就是安装电动卷帘门前期的布线工作，不过需要提醒的是，以上所提到的预留电位位置是需要保证随时可以通电的。

Note: the above method is the wiring work in the early stage of installing the electric rolling shutter door, but it needs to be reminded that the reserved potential position mentioned above needs to ensure that it can be powered on at any time.

布线就是这么简单，于控制器怎么接线、如何通电?产品上面有注明，只要接好后把原来布线时预留的插座或开关拆除把控制器放进去装牢就可以了。

Wiring is so simple. As for how to wire and power on the controller, it is indicated on the product. As long as the socket or switch reserved for wiring is removed and the controller is put in and installed firmly.