遥控卷帘门想必大家都不陌生，卷帘门可以分为无线好红外线两种，不管是哪种，用的时间长了任何东西都有坏的可能，那么济南遥控卷帘门故障以及解决方法有哪些？

The remote control roller shutter door must be familiar to everyone. The roller shutter door can be divided into two types: wireless and infrared. No matter which one is used, anything can be broken after a long time. What are the faults and solutions of Jinan remote control roller shutter door?

1.电动机不动或转速慢——毛病缘由普通是线路断路、电机烧损、中止按钮没复位、限位开关举措、负载较大等惹起。

1. The motor does not move or the speed is slow - the cause of the problem is generally caused by circuit breaking, motor burning, failure to reset the stop button, action of limit switch, large load, etc.

处置办法：反省线路、并接通;改换烧损电机;改换按钮或反复按动几次;拨动限位开关滑块使它脱离微动开关触点，并调整微动开关地位;反省机器局部有无卡阻，若有则消弭卡阻清算妨碍物。

Solution: reflect on the line and connect it; Replace the burnt motor; Change the button or press it several times; Toggle the limit switch slider to separate it from the microswitch contact and adjust the position of the microswitch; Check whether the machine is blocked locally. If so, eliminate the blocking and clearing obstacles.

2.控制生效——毛病发作的部位及缘由：.继电器(接触器)触点粘死、行程微动开关生效或触片变形、滑块紧定螺钉松、靠板螺丝松使靠板移位，使滑块或螺母不能随丝杆转动而挪动、限位器传动齿轮破损、按钮上、下键卡死。

2. Control effectiveness - location and cause of disease onset: The contact of relay (contactor) is stuck, the travel micro switch is effective or the contact piece is deformed, the set screw of slider is loose, the screw of backup plate is loose, and the backup plate is displaced, so that the slider or nut cannot move with the rotation of the screw rod, the transmission gear of the limiter is damaged, and the upper and lower keys of the button are stuck.

处置办法：改换继电器(接触器);改换微动开关或触片;紧定滑块螺钉并使靠板复位;改换限位器传动齿轮;改换按钮。

Disposal method: replace the relay (contactor); Replace the microswitch or contact piece; Tighten the slider screw and reset the backup plate; Replace the transmission gear of the stopper; Change button.

3.手拉链不动——毛病缘由：环形链条堵住十字槽;棘爪无脱离棘轮;压链架卡死。

3. The hand zipper does not move - cause of the problem: the circular chain blocks the cross groove; The pawl does not disengage from the ratchet wheel; The pressure chain frame is jammed.

处置办法：理顺环形链条;调整棘爪与压链架地位;改换或光滑销轴。

Disposal method: straighten out the circular chain; Adjust the position of pawl and pressure chain frame; Replace or smooth the pin shaft.

4.电机振动或噪声较大——毛病缘由：刹车盘不均衡或断裂;刹车盘无紧固;轴承失油或生效;齿轮啮合不顺、失油或磨损严重;电机电流声或振动.

4. Motor vibration or noise is large - cause of fault: brake disc is unbalanced or broken; The brake disc is not fastened; Bearing oil loss or effectiveness; Gear meshing is not smooth, oil loss or serious wear; Motor current sound or vibration

处置办法：改换刹车盘或重新调整均衡;紧固刹车盘螺母;改换轴承;修配电机轴输入端齿轮、光滑或改换;反省电机，如电机坏损则改换。

Solution: replace the brake disc or readjust the balance; Tighten the brake disc nut; Replace the bearing; Repair the gear at the input end of the motor shaft, smooth or replace it; Check the motor and replace it if it is damaged.

5.反省电动卷闸门的支位偏向及螺丝松紧状况，反省皮带的松紧状况，反省控制器对电机输入清洁机箱外部的油污、灰尘反省自动电动门各部件的磨损状况高速门，开关门宽度、速度、制动等状况反省电压参数能否正常维修、改换损坏的部件业主还需注重自动门的活期颐养与维护，自动门由于受装置质量及运用环境的影响，运用进程中难免会发作成绩。

5. Reflect on the support deviation of the electric rolling gate and the tightness of the screws, the tightness of the belt, the controller's input to the motor, the cleaning of the oil and dust outside the cabinet, the wear condition of the components of the automatic electric door, the width, speed, braking and other conditions of the high-speed door, the opening and closing width, the speed and the braking, and the voltage parameters. The owner also needs to pay attention to the current care and maintenance of the automatic door, Due to the influence of device quality and application environment, automatic doors will inevitably have problems in the process of application.

以上就是今天分享的遥控卷帘门的相关详情，如果对您有帮助，就来关注我们网站http://www.jnzxmy.com吧，为您提供更好更多的资讯！

The above is the relevant details of the remote control roller shutter door shared today. If it is helpful to you, please follow our website http://www.jnzxmy.com Let's provide you with better and more information!